Darth Vader
SPFX V2 ANH & ESB Style Helmets
(Above)
A Finished Darth Vader ESB SPFX V2 Helmet
SPFX makes 2 Styles the ANH and the ESB. Both are in Unfinished form but for extra he will finish it and It looks Fantastic. You Can see the Picture Below of the Finished ESB Style Helmet.
If you are a Collector Or just want a Display or to Troop in and are Looking to Get One Of these Fantastic SPFX V2 Helmet Castings.
Darth Vader ANH style SPFX V2 Casting
This is a great project to make and paint your own Darth Vader helmet
The helmet is made if sturdy fiberglass construction
The casting will need a bit of prep work (sanding, filling, priming etc.) so that it can be painted....
(Below are 3 Pictures of the Darth Vader ANH style)
Now if you want a Close to Movie Accurate Helmet as Possible Look at this one
There Is No Other Helmet Found That Is This Fantastic Found On The Net........
**********************
Darth Vader ESB Style SPFX V2 Casting
(Note: This one is My Favorite)
This is a great project to make and paint your own Darth Vader helmet
The helmet is made if sturdy fiberglass construction
The castingwill need a bit of prep work (sanding, filling, priming etc.) so that it can be painted....
Again His work Is Perfection and Speeks For it's Self, That's Why I searched For him for some time just so I could get one of these before it was too late.
Don't settle for junk like you fine on the net most of the time.
These Helmets only come Once in a lifetime so don't miss out.
(Below are 3 Pictures of the Darth Vader ESB style)
You will not find a 100% More Movie Accurate Helmet Than This.
If you are a Collector Or just want a Display or to Troop in and are Looking to Get One Of these Fantastic SPFX V2 Helmet Castings.
They Say A Master Craftsman Only Happens Once in a Life Time
Well My Opinion is that SPFX (AKA Scott) is it.
The Paint & Primer
I am Using Dupli-Color Sandable Primer #1692 (Gray Hot Rod Primer) or The Better stuff to help fill in the imperfections better use Dupli-Color Filler Primer (High Build Formula) #FP101 Grey Filler
I will be doing 4 to 5 light coats and wet sanding with a 800grt.st time then1000grt. 2 times and last 2000grt. sandpaper after each application allow atleast 30 min between applications
After that I will allow a week for the last coat of primer to harden.
Then I will apply 3 to 4 coats of Dupli-Color #T177 Gunmetal Gray to paint the Face plate with. I will 2-tone the face plate it is not all black or all Gunmetal grey
Then Allow the Face Plate to dry and the paint to harden for a week after the last coat
The Dome I will Paint it with 3 to 4 Coats Of Dupli-Color #DA1600 Gloss Black
How To Paint
Below the Dark areas are painted Black and the white area is Gunmetal Grey on the Facemask and the helmet All Gloss Black.
